What is TDS ? Why is it important?

 TDS stands for Total Dissolved Solids, which is a measure of the combined content of all inorganic and organic substances that are present in a liquid solution. TDS is typically expressed in milligrams per liter (mg/L) or parts per million (ppm) and includes minerals, salts, metals, and other substances that can dissolve in water.

In general, TDS is an important parameter to measure the quality of water, as high TDS levels can affect the taste, odor, and appearance of the water. TDS levels can also indicate the presence of contaminants or impurities in the water, which may affect its suitability for various applications such as drinking, irrigation, or industrial use.

While some minerals and substances found in total dissolved solids (TDS) can be beneficial for human health in small amounts, the importance of TDS for human body depends on the type and amount of substances present.

In general, the human body requires certain minerals and trace elements, such as calcium, magnesium, potassium, and sodium, which are typically present in TDS. However, excessive amounts of some of these minerals and other substances in drinking water can be harmful to human health. For example, high levels of sodium in water can contribute to high blood pressure, while high levels of lead, arsenic, or other toxic metals can lead to serious health problems.

Therefore, it is important to monitor the TDS levels in drinking water and ensure that it falls within the safe limit recommended by regulatory authorities. The recommended TDS level for drinking water varies by country, but typically falls within the range of 150-500 ppm. It is also important to note that TDS is not the only factor to consider when evaluating water quality, and other factors such as pH, turbidity, and microbial contaminants should also be taken into account

Comments

Post a Comment

Popular posts from this blog

Reasons why sludge is not settling properly in a clarifier!

Image
 Why sludge not settling in clarifier? There could be several reasons why sludge is not settling properly in a clarifier. Here are some possible explanations: High hydraulic or organic loading: If the clarifier is receiving a high volume of wastewater or if the wastewater has a high concentration of organic matter, it can overwhelm the settling capacity of the clarifier. The excessive flow or high organic load can disrupt the settling process and prevent the sludge from settling effectively. Hydraulic or design issues: Improper hydraulic design or inadequate equipment sizing can lead to short-circuiting or dead zones within the clarifier. Short-circuiting occurs when the flow patterns allow particles to bypass the settling zone, while dead zones are areas where there is minimal or no flow. Both conditions can hinder the settling of sludge. High influent solids concentration: If the influent wastewater has a high concentration of suspended solids, it can result in a dense sludge blanket
Read more

Drinking Water Parameters in India !

Image
  As per the Indian Standard for Drinking Water (IS 10500:2012), the following are the recommended parameters for safe and healthy drinking water in India: Microbial Parameters: Total coliform bacteria: No detectable coliforms per 100 mL Escherichia coli (E. coli): No detectable E. coli per 100 mL Faecal Streptococci: No detectable faecal streptococci per 100 mL Chemical Parameters: pH: 6.5 to 8.5 Total Dissolved Solids (TDS): Less than 500 milligrams per liter (mg/L Chloride: Less than 250 mg/L Nitrate: Less than 45 mg/L Fluoride: 0.6 to 1.5 mg/L Arsenic: Less than 0.01 mg/L Lead: Less than 0.01 mg/L 3.Physical Parameters: Turbidity: Less than 5 Nephelometric Turbidity Units (NTU) Color: No standard limit, but colorless or slightly colored water is preferable Odor: No standard limit, but no objectionable odor is preferable. It's worth noting that these parameters may vary depending on local or regional regulations and guidelines, and that water treatment facilities may have additi
Read more

Difference between MBR and SBR

Image
Difference between MBR and SBR   MBR (Membrane Bioreactor) and SBR (Sequencing Batch Reactor) are two different wastewater treatment technologies that are commonly used for treating and purifying wastewater. While both technologies employ biological processes for treatment, there are some key differences between MBR and SBR: Configuration: MBR: In an MBR system, the biological treatment and membrane filtration occur simultaneously. The membranes act as a physical barrier to separate the treated water from the biomass and solids. SBR: In an SBR system, the biological treatment occurs in a batch mode, meaning the treatment process occurs in a series of sequential steps. Each step includes a fill phase, react phase, settle phase, and decant phase. Filtration Method: MBR: MBRs utilize membrane filtration as the primary method for solid-liquid separation. The membrane modules contain fine pores that allow treated water to pass through while retaining suspended solids, bacteria, and other co
Read more